Audison bit Ten

Audison bit Ten

Značka: Audison


7 990 
včetně DPH

Kód: AU 66752000

Datum dodání: Na dotaz

Power Suply
Voltage 11 ÷ 15 VDC
Idling current 0.4 A
Switched off without DRC < 2.5 mA
Switched off with DRC < 4.0 mA
Remote In voltage 7 ÷15 VDC (1.3 mA)
Remote Out voltage 12 VDC (130 mA)
Distorsion-THD@1 kHz, 1VRMS Output 0.005 %
Bandwidth@ -3dB 10 ÷ 22 kHz
S/N Ratio @ A weighted 96 dBA
Channel Separation (@1 kHz) 85 dB
Input sensitivity (Low Level) 0.6 ÷ 5 VRMS
Input sensitivity (High Level) 2.0 ÷ 15 VRMS
Max Output Levels 4 VRMS
Input impedance (AUX) 15 kΩ
Input impedance (High Level) 2.2 kΩ
Inputs Low Level (Pre In): AUX L/R
High Level (Spk In): FL-FR-RL-RR, Phone In
Outputs Analog Pre Out: Ch1 ÷ Ch5
Type 12/24 dB Linkwitz
6/12/18/24 dB Butterworth
Mode Full/HiPass/LowPass/BandPass (indipendent)
Type 31 Band, ISO 1/3 Oct, 20 Hz ÷ 20 kHz
Gain ± 12 dB
Delay 0 ÷ 22 ms (748 cm)
Time Alignment
Distance 0 ÷ 510 cm
Delay 0 ÷ 15 ms
Step 0.08 ms; 2.8 cm
Fine set step 0.02 ms; 0.7 cm
WxHxD 191x34x131 mm
Weight 0.6 kg
Audison Bit Ten
Audo DSP
and converters
32 bit Cirrus Logic (Clock speed: 147 MHz) Digital Signal Processing chip and A/D D/A converters working in PCM at 48 kHz with 24 bit resolution. The processor speed allows the user to hear and verify in real time the changes applied during the tuning
Audio Inputs 4 independent high-level channels with automatic summing capability
1 analog low-level stereo auxiliary input
1 high-level momentary audio interrupt input (with priority) on Phone Mute cable (settable through PC)
Audio Outputs 5 independent analog PRE channels featuring adjustable level
1 USB /B (2.0) connector for PC connection
1 AC Link control bus connectors for DRC
1 input for external Mute (settable through PC)
Configuration Guided procedure that, thanks to a wide range of set names, provides the ability to assign each component to the bit Ten connections and automatically coordinate their functioning
ART™, Automatic Remote Turn on/off, selectable from Hi-Level Front L. The ART™ can be enabled through an external switch
Through the Remote IN
Through the car ignition key with memory function
Through the DRC (optional)
Automatically through the hands-free phone kit
In/Out Volume Input sensitivity manual adjustable for the Master Hi-Level inputs (with supplied Test CD)
Manual input sensitivity adjustment for auxiliary inputs
Independent level control for each output channel for system fine tuning (-40 ÷ 0 dB)
De-equalization Automatic de-equalization of signal fed into the high-level inputs (with supplied Test CD) if necessary. It can also be performed without the PC
Equalizers 31-band graphic equalizer (1/3 Oct.; ±12 dB) for each output channels
Crossover Filter Filter typology: selectable; Hi-pass, Lo-pass, Full Range, Band pass with independent selectable cut-off slope
Cut-off frequency: 70 steps available from 20 Hz to 20k Hz
Cut-off slope: selectable; 6 to 24 dB/Oct.
Selectable alignment: Linkwitz or Butterworth
Mute: selectable for each output (On/Off)
Phase: selectable for each output (0°/180°)
Signal channels
It can reconstruct a stereo output signal from a multi-channel input signal. In addition it can reconstruct rear, centre and subwoofer output channels from a stereo input
Time Alignment Guided procedure for the speaker distance data entry with an automated calculation (distance to time) for each channel for accurate delay times. System also provides for manual fine tuning of delay (0.02 ms fine set)
DRC (optional) Master Volume, Subwoofer Volume, Balance and Fader controls, Input selection, Memory selection, Adjustable display brightness
Memory 2 presets separately managed and recalled by the DRC (optional)
bit Ten software Microsoft Windows (XP, 7 and Vista) based software with “Standard” and “Expert” operating modes; screen resolution: 1024x600 px min.