Rockford Fosgate P1000X2
2 kanálový zesilovač, 2x300W / 1x1000W
Značka: Rockford Fosgate
19 190 Kč
včetně DPH
Kód: p1000x2
Datum dodání: Na dotaz
The Punch P1000X2 is a 2-channel stereo amplifier capable of producing 500 Watts into each channel at 2-Ohms. The P1000X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.
- High level input capable with Auto Turn-On circuit
- RCA pass-thru outputs
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz.
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
| CEA-2006 Compliant: |  CEA-2006 Power Rating300W x 2 @ 4Ω ≤1.0% THD+N |
| Number of Channels: | 2 |
| Rated Power (RMS Continuous Power): |
300 Watts x 2 @ 4-Ohm 500 Watts x 2 @ 2-Ohm 1000 Watts x 1 @ 4-Ohm Bridged |
| Total Power (Sum of Rated Power): |
1000 Watts RMS |
| Dynamic Power (PVC/PowerCube®): |
401 Watts x 2 @ 4-Ohms 0° Res 656 Watts x 2 @ 2-Ohms 0° Res |
| Bridgeable: | Yes |
| Frequency Response: | 20Hz to 20kHz +/- 1.0dB |
| Efficiency (average): | 69% @ 4-Ohm 64% @ 2-Ohm |
| Total Harmonic Distortion (THD+Noise): | 4-Ohm: <1.0% 2-Ohm: <1.0% |
| Crossover Controls: | High-Pass/Low-Pass (HP/LP): 50Hz-250Hz 12dB/octave Butterworth |
| Tone Controls: | Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz Function depends upon LP/AP/HP switch position |
| Input Sensitivity: | 150 mV - 12 V |
| Signal Input: | Hi/Low level: 1 RCA pair |
| Signal Output: | Low level: 1 RCA pair |
| Power Input Connector: | Captive C-Clamp |
| Power Wire Gauge: | 4 AWG |
| Speaker Output Connector: | Captive C-Clamp |
| Speaker Wire Gauge: | 8 AWG to 18 AWG |
| Heat Sink Type: | Cast aluminum |
| Cooling: | Convection |
| Remote Controls: | Optional Punch Level Control (PLC2) Ready |
| Visual Indicators: | Power/Protect/Thermal LED Input Clip LED3 Output Clip LED1,2,3 LED Color Legend: 1BLUE: <0.5% THD 2VIOLET: 1% THD 3RED: 10%+ THD |
| Circuit Topology Class: | Class-A/B |
| Operating Voltage: | 9 - 16 VDC |
| Recommended Fuse (not included): |
140 A |
| Max. Current Draw (13.8V Sinewave): | 140 A |
| Average Current Draw (13.8V Music): | 70 A |
| Suggested Alternator: | 100 A |
| Shipping Weight: | 15 Lbs. (6.80 Kg.) |
| Dimensions (H x W x D): | 2.38 x 7.76 x 15.03 (in) 6.05 x 19.71 x 38.18 (cm) |
| Dimensional Diagram: |  |